We are experiencing technical difficulties with online orders. We are working to resolve this issue.

Your Perfect Products Your Choice

We only provide white basic products. When you purchase, you need to buy a small bottle of matching color paste,

or you can ask the local agent to help you mix the color.

PRO1964 < Profession < Inspiration < HOME
PRO1964
COLOR CODE:
PRO1964

Ourstucco® Professional Ultra Primer

Supported by color dispenser

Flat, Exterior Interior

1 gal, White

$224.99
150+ bought in past month

Ourstucco® Professional Ultra Primer is a silicone and waterborne polyurethane composite coating that bonds to a wide variety of substrates. Ourstucco® Professional Ultra Primer is very strong and water resistant. It is not intended for use over old coatings that are incomplete or substrates with moisture issues. All types of substrates: including tile, glass, steel, wood, plastic, rubber and more - simply clean, apply the desired Ultra Primer system to give your topcoat a brand new adhesion. Suitable for any bare, stained, sealed or previously painted surface to extend the life of subsequent coatings. Not recommended for priming cement and aluminum substrates, use Silicate Penetrating Primer for cement floors and Aluminum Primer for bare aluminum substrates. Plastics with release agents should be sanded prior to application. Each bucket of Ultra Primer will cover 450 sq. ft.

PRODUCT FEATURES

1 or 2 Step System                                                     No stripping&sanding

 Outstanding resistant&flexibility                               Superior adhesion to tough surfaces    

Extra long service life                                                 Suitable for any substrate                                

 Maximum scratch and stain resistance                      Must be protected, not easy to clean

WHTERE TO USE

Pottery,Ceramic,Tile,Glass                                         Wood,Metal,GRC,JRC,Plastic,Ebonite

   Epoxy,Stone,Terrazzo                                                  Doors/Windows,Mouldings,Cupboards

   Kitchen fittings,                                                        Washroom,Lavatory,Radiators         Floor,Staircase

SURFACE PREPARATION

Rinse or sweep away all dirt and dust. Clean the entire surface with a cleaner and degreaser or stain remover. Rinse thoroughly and allow to dry completely. For any areas with caulk, the caulk will need to be removed before applying the coating. For waxed floors, tile, stone, furniture, etc., the wax will need to be removed before applying the coating.

PREVIOUSLY COATED COATINGS

Make sure the substrate is clean and dry. Use a wire brush to remove any loose or flaking paint or stains. If the substrate has been sealed, the sealer must be removed by grinding or shot blasting. To ensure proper bonding, lightly sand the entire surface.

MIXING

Premix both components (Parts A and B) thoroughly to ensure any settled pigment is re-dispersed before adding the activator (Part B) to the base (Part A). It is critical to add all of Part B to Part A and mix for 3 minutes. Do not mix the color chips in with the coating. Allow the coating to stand 15 minutes before using. Mix again just prior to application. The activated coating must be used within 3 hours after mixing,the activator (Part B) is not a required option.

APPLICATION

Apply only when air, material and surface temperatures are between 60-85°F (15-29°C) and surface temperature is at least 5°F (3°C) above dew point. Relative humidity should not be greater than 85%. After allowing an induction period, use a brush or edger to cut around the perimeter of the floor along walls or other areas that the roller cannot reach before beginning application with a roller. Apply an even coat of Ourstucco® Professional Ultra Primer using a synthetic 1⁄2-inch nap roller cover on a 9-inch roller stand. Less than 2 wet mils is recommended. Allow to dry 24-hours before applying other topcoats. If topcoat smoothness is not required, it is recommended that Professional Ultra Primer be applied as rough as possible. When the substrate is too rough, a second coat of primer may be applied at a thickness of 2-3 wet mils and allowed to dry 24 hours before other topcoats. Any reactive material must be applied within 3 hours of initial mixing.

未命名-4.jpg

CLEAN UP AND STORAGE

Use warm water and a mild detergent. Dried products can be removed by soaking in warm water. Protect unused products from freezing. Fully cured products can be cleaned with mild soap and water after 7 days. Do not use abrasive cleaners.

PACKAGING:Floor Coating comes as a kit. Part A Base 3.78liter , Part B Activator 0.12liter.

LIMITED LIFETIME WARRANTY:If this coating does not perform as specified above, Ourstucco.Inc will, at its option, upon receipt of proof of purchase, either provide you with an equal amount of new coating or refund the purchase price of this coating. This warranty does not cover any claims, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To request a Material Safety Data Sheet or to speak with an Ourstucco certified coatings expert, please call Ourstucco.Inc directly at 1-800-853-8698

CAUTIONS !

Before use, read label precautions Use only in well-ventilated conditions. Harmful if inhaled. Causes eye, nose, throat and lung irritation. Overexposure may cause lung damage. To avoid overexposure, open windows and doors or use other means to ensure fresh air enters during application and drying. If you experience tearing, headache or dizziness, increase fresh air intake or wear respiratory protection (NIOSH approved) or leave the area. Wash hands after use. Do not transfer contents to other containers for storage. Close container after each use. Keep away from heat and flame. Do not breathe dust, vapors, or spray. If spilled, contain spill and remove with inert absorbent. Dispose of contaminated absorbents, containers and unused items in accordance with local, state and federal regulations.WARNING!If you scrape,sand,or remove old paint,you may release lead dust.LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS,SUCH AS BRAIN DAMAGE,ESPECIALLY IN CHILDREN.PREGNANTWOMEN SHOULD ALSO AVOID EXPOSURE.Wear a NIOSH-approved respirator to control lead exposure.Clean up carefully with a HEPA vacuum and a wet mop.Before you start.find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD.or log on to www.epa.gov/lead.

WARNING Cancer and Reproductive Harm

ADVERTENCIACancery Dano Reproductivo

First Aid: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.

Testimonials

  • The colors are very pretty  The refreshed doors go very well with the style of the home  Like getting a new home !

    Lisa

  • The surface of the refurbished tiles is wear-resistant and scratch-resistant and l never thought refurbishment would become so easy

    Jennie

  • Very environmentally friendly, the product has no particular smell and makes us feel very safe and secure


    Ellen

  • The quality of the product is very good the construction is very easy and the surface is very strong The multi-layerec texture and very plain color is the style of wall l wanted

    Jeff