Ourstucco® Professional Tile Paint is a two-component waterborne polyurethane resin designed to change the color of ceramic, glass, ceramic tile. Professional Tile Paint is stain and abrasion resistant. It is not suitable for tile with incomplete coating or waxed polish. Transform any room by renovating the color of outdated tile - just clean, apply desired primer + topcoat system and your tile will look brand new. Suitable for any exposed, stained, sealed or previously painted tile surface such as wall or floor tile, bathroom tile, kitchen tile and living room tile. Great for laundry rooms, basements, kitchens, bathrooms and more. White Primer Kit can be used to paint tile super white or tone it down to a variety of lighter colors. Dark Primer can be tone down to a variety of darker colors and must be tone down before use. Each kit covers 245 sq. ft.

PRODUCT FEATURES

    2 Step System                                                           No stripping, sanding or priming

    Extreme hide and coverage                                        Superior adhesion to tough surfaces    

    Excellent colour retention                                          Outstanding touch-ups                                

    Maximum scratch and stain resistance                      No-Slip function

WHTERE TO USE

Ceramic,Tile,Glass                                                       Various Pottery Products

Ceramic Decorative Items                                           Living Room,Kitchen,Toilet,Bathroom

Glass Partition&Cement Floor                                    Shopping Mall,Plaza,Parking Lot

SURFACE PREPARATION

Rinse or sweep away all dirt and dust. Clean the entire surface with a cleaner and degreaser or stain remover. Rinse thoroughly and allow to dry completely. For any areas with grout, the grout will need to be removed before applying the coating. For glazed tile, stone, furniture, etc., the glaze will need to be deglazed and sanded before applying the coating.

PREVIOUSLY COATED TILES

Make sure the substrate is clean and dry. Use a wire brush to remove any loose or flaking paint or stains. If the substrate is sealed, the sealer must be removed by grinding or shot blasting. To ensure proper adhesion, sand the entire surface.

MIXING

Premix both components (Parts A and B) thoroughly to ensure any settled pigment is re-dispersed before adding the activator (Part B) to the base (Part A). It is critical to add all of Part B to Part A and mix for 3 minutes. Do not mix the color chips in with the coating. Allow the coating to stand 15 minutes before using. Mix again just prior to application. The activated coating must be used within 3 hours after mixing.

APPLICATION

Apply only when air, material, and surface temperatures are between 60-85°F (15-29°C) and surface temperature is at least 5°F (3°C) above dew point. Relative humidity should not be greater than 85%. After allowing for an induction period, use a brush or edger to cut around the perimeter of the floor along walls or other areas that the roller cannot reach before beginning application with a roller. Apply an even coat of Ourstucco® Professional Tile Paint using a synthetic 1⁄2-inch nap roller sleeve on a 9-inch roller stand. Less than 2 wet mils is recommended. Allow to dry 12 hours before applying a second coat. 2-3 wet mils is recommended for the second coat. Allow to dry 7 days before normal use. NOTE: New paint may be applied over areas of loose material outside of previously painted areas. Keep edges wet to prevent lap marks and gloss differences. If the underlying tile substrate is a lighter color, only one coat is required. Any active material must be used within 3 hours of initial mixing. .

CLEAN UP AND STORAGE

Use warm water and a mild detergent. Dried products can be removed by soaking in warm water. Protect unused products from freezing. Fully cured products can be cleaned with mild soap and water after 7 days. Do not use abrasive cleaners.

PACKAGING:Floor Coating comes as a kit. Part A Base 3.78liter , Part B Activator 0.6liter.

LIMITED LIFETIME WARRANTY:If this coating does not perform as specified above, Ourstucco.Inc will, at its option, upon receipt of proof of purchase, either provide you with an equal amount of new coating or refund the purchase price of this coating. This warranty does not cover any claims, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To request a Material Safety Data Sheet or to speak with an Ourstucco certified coatings expert, please call Ourstucco.Inc directly at 1-800-853-8698

CAUTIONS ！

Before use, read label precautions Use only in well-ventilated conditions. Harmful if inhaled. Causes eye, nose, throat and lung irritation. Overexposure may cause lung damage. To avoid overexposure, open windows and doors or use other means to ensure fresh air enters during application and drying. If you experience tearing, headache or dizziness, increase fresh air intake or wear respiratory protection (NIOSH approved) or leave the area. Wash hands after use. Do not transfer contents to other containers for storage. Close container after each use. Keep away from heat and flame. Do not breathe dust, vapors, or spray. If spilled, contain spill and remove with inert absorbent. Dispose of contaminated absorbents, containers and unused items in accordance with local, state and federal regulations.WARNING!If you scrape,sand,or remove old paint,you may release lead dust.LEAD IS TOXIC.EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS,SUCH AS BRAIN DAMAGE,ESPECIALLY IN CHILDREN.PREGNANTWOMEN SHOULD ALSO AVOID EXPOSURE.Wear a NIOSH-approved respirator to control lead exposure.Clean up carefully with a HEPA vacuum and a wet mop.Before you start.find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD.or log on to www.epa.gov/lead.

WARNING Cancer and Reproductive Harm

ADVERTENCIACancery Dano Reproductivo

First Aid: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.